Factory Mopar Windshield Wiper Blades

Genuine OEM Mopar Windshield Wiper Blades

The short answer: replace your wiper blades every 6 to 12 months, or sooner if they streak, skip, chatter, smear, or show cracked rubber. In hot, sunny climates, blades often wear out on the shorter end of that range, even if you rarely use them. Choose blades in the exact lengths and connector style for your vehicle, replace both front blades together, and don’t forget the rear blade on SUVs, minivans, and the Wrangler. Genuine Mopar wiper blades are made to fit your Chrysler, Dodge, Jeep, or Ram’s wiper arms and windshield curve.

Wiper blades are one of the least expensive parts on your vehicle and one of the most important for safety. When a sudden storm hits on the highway, the difference between a clear view and a smeared windshield is a set of blades in good condition. At Mopar Wholesale Parts, every wiper blade is a genuine OEM Mopar part, matched to your vehicle by VIN and offered at wholesale-level prices with fast nationwide shipping.

How Wiper Blades Work

A wiper blade has a flexible rubber element held against the glass by a frame or spring steel band. As the wiper arm sweeps, the rubber edge squeegees water, snow, and dirt off the windshield. For a clean wipe, the rubber needs a sharp, flexible edge, and the blade needs to apply even pressure along its entire length, following the curve of the glass.

Over time, sunlight, heat, ozone, dust, and road grime harden and crack the rubber and round off its wiping edge. Once that happens, the blade can’t clear the glass cleanly, no matter how new the rest of the blade looks.

Types of Wiper Blades

Type	Design	Strengths
Conventional (frame)	A metal frame with pressure points holding the rubber	Affordable and effective in mild conditions
Beam (bracketless)	A curved spring steel band inside the rubber, with no external frame	Even pressure, sleek look, resists ice and snow buildup
Hybrid	A beam-style blade with an aerodynamic shell over a supporting frame	Combines even pressure with a protective cover
Rear blades	Shorter blades for rear windows, often with model-specific connectors	Designed for the rear glass and arm on SUVs and minivans

Many modern Mopar vehicles use beam-style blades from the factory. Genuine Mopar replacements match the original design, length, and connector.

Signs It’s Time for New Wiper Blades

• Streaking: lines of water left behind after each pass.
• Skipping or chattering: the blade jumps across the glass instead of gliding.
• Smearing: a hazy film that blurs your view, especially at night.
• Unwiped areas: sections of glass the blade misses.
• Squeaking: often from hardened rubber.
• Visible damage: cracked, split, or torn rubber, or a bent frame.
• Age: blades that are more than a year old, even if they look fine.

Wiper Blades in Hot, Sunny Climates

Heat and sunlight are some of the hardest conditions on wiper blades. In places like the desert Southwest, intense sun and high temperatures can dry out and crack rubber well before you see any rain. Dust storms add abrasive grit to the windshield, and when monsoon storms arrive, worn blades may smear dust and water instead of clearing it.

• Replace blades before the rainy season, so they’re ready when storms arrive.
• Park in the shade or use a sunshade when possible to reduce sun exposure. See our sun shades and car covers.
• Clean the windshield before using the wipers in dusty conditions. Wiping dry, dusty glass can scratch the glass and damage the rubber.
• Use washer fluid to loosen dirt before wiping.

Wiper Blades in Snow and Ice

• Clear ice and snow by hand with a scraper and the defroster before using the wipers. Don’t use the wipers to break ice.
• Free frozen blades gently. Pulling a blade off frozen glass can tear the rubber.
• Consider beam-style blades, which resist ice and snow buildup better than framed blades.
• Use winter washer fluid rated for low temperatures.

Wiper Blades by Mopar Brand

Jeep

The Wrangler’s upright windshield and the dusty, muddy conditions many Jeeps see make good blades essential. Most Jeep SUVs have a rear wiper as well. Wrangler owners who fold down the windshield should check the blades and arms whenever it’s raised again. See Jeep parts.

Ram

Ram trucks have large windshields that need long blades in good condition, especially for highway driving and towing in bad weather. Commercial vans like the ProMaster have their own blade requirements. See Ram parts.

Dodge

From the Charger and Challenger to the Durango, blade lengths and styles vary by model. The Durango also has a rear wiper. See Dodge parts.

Chrysler

The Pacifica minivan has a large windshield and a rear wiper, while sedans like the 300 have front wipers only. See Chrysler parts.

Rain-Sensing Wipers and Driver-Assistance Cameras

Many newer vehicles have rain-sensing wipers and forward-facing cameras mounted near the top of the windshield. These systems depend on a clean, clear windshield:

• Rain-sensing wipers use a sensor behind the glass to detect moisture and adjust wiper speed automatically. Worn blades that leave streaks can confuse the sensor.
• Driver-assistance cameras support features such as lane-keeping assistance and forward collision warning. Streaks and smears in the camera’s view can affect how these features work.

Keeping your blades fresh and your windshield clean helps these systems work as intended.

Wiper Arms vs. Wiper Blades

The blade is the replaceable part that touches the glass. The arm is the spring-loaded metal piece that holds the blade. If new blades don’t solve a wiping problem, the arm may be the cause:

• A weak spring reduces pressure, causing streaks at speed.
• A bent arm can hold the blade at the wrong angle, causing chatter.
• A loose arm can cause the wiper to stop in the wrong position.

How to Choose the Right Wiper Blades

1. Shop by VIN or select your year, model, and trim.
2. Know your sizes. The driver’s and passenger’s blades are often different lengths. Your owner’s manual lists them, and our catalog matches them to your vehicle.
3. Match the connector. Wiper arms use different attachment styles, such as hooks, pins, and push-button or side-lock connectors. Genuine Mopar blades come with the correct connector for your arm.
4. Include the rear blade if your vehicle has one.
5. Replace in pairs. Replace both front blades together for even wiping.

Choosing Blades for Your Climate

Climate	Challenges	Recommendations
Hot and sunny	Heat and UV dry out and crack rubber	Replace every 6 months or before the rainy season; park in the shade
Dusty or desert	Abrasive grit on the windshield	Clean the glass before wiping; use washer fluid
Snow and ice	Ice buildup and frozen blades	Beam-style blades; clear ice before wiping
Rainy	Frequent use wears rubber	Inspect often and replace at the first sign of streaking
Mild	Gradual aging	Replace about once a year

Don’t Forget the Rear Wiper

Rear wipers are easy to overlook because they’re used less often, but they age from heat and sun just like the front blades. On SUVs and minivans, the rear window collects road spray and dust that can hide what’s behind you. Check the rear blade whenever you replace the front blades, and replace it when it streaks or the rubber cracks. Rear blades often use model-specific connectors, so shop by VIN.

How to Replace Your Wiper Blades

1. Check for a service position. On some vehicles, the wipers rest under the edge of the hood. Your owner’s manual may describe a service position that raises them for replacement.
2. Lift the wiper arm away from the windshield. Place a folded towel on the glass in case the arm snaps back.
3. Release the old blade. Press the release tab or lift the locking clip, then slide or pivot the blade off the arm.
4. Attach the new blade to the arm until it clicks firmly into place.
5. Lower the arm gently onto the glass.
6. Repeat for the other blades, then return the wipers to their normal position if you used the service position.
7. Test with washer fluid and check for a clean, quiet wipe.

Troubleshooting Wiper Problems

Problem	Likely cause	Fix
Streaks	Worn rubber or a dirty windshield	Clean the glass; replace the blades
Chattering	Hardened rubber, a bent arm, or film on the glass	Clean the glass; replace the blades; check the arm
Smearing	Oil, wax, or road film on the glass	Deep-clean the windshield
Squeaking	Dry glass or hardened rubber	Use washer fluid; replace the blades
Missed areas	A bent frame or weak arm spring	Replace the blade; check the arm
Wipers don’t move	A blown fuse, failed motor, or loose linkage	Have the system inspected

Your Washer System

Wiper blades work best with a working washer system. Keep the reservoir filled, use washer fluid suited to the season, and check that the nozzles spray onto the windshield, not over the roof. A clogged nozzle can often be cleared carefully with a thin pin. If your vehicle has a rear washer, check it too.

Wiper Blade Materials

Most wiper blades use natural or synthetic rubber, often with a coating that helps the blade glide smoothly and resist wear. Some blades use silicone, which can resist heat and UV well. Whatever the material, the wiping edge must stay sharp and flexible. Genuine Mopar blades use materials selected to work with your vehicle’s windshield and wiper arm pressure.

How to Clean Your Windshield Properly

1. Rinse the glass to remove loose dust and grit before wiping, so you don’t drag abrasive particles across it.
2. Use a glass cleaner and a clean microfiber cloth, working in overlapping sections.
3. Remove stubborn film, such as tree sap, bugs, and road film, with a product made for automotive glass.
4. Clean the area under the wipers, along the bottom edge of the windshield, where dirt collects.
5. Wipe the blades’ rubber edges with a damp cloth.
6. Clean the inside of the glass too, since haze inside the windshield adds to glare at night.

A clean windshield helps new blades last longer and wipe more cleanly, and it helps cameras and rain sensors work properly.

Winter Wiper Blades

Winter blades are designed for snow and ice, often with a rubber boot that covers the frame so ice can’t build up in the joints. If you live where snow is common, or travel to the mountains in winter, consider switching to winter blades for the cold months.

Caring for Your Wiper Blades

• Clean the rubber edge with a damp cloth to remove dirt and grime.
• Keep the windshield clean, since dirt and sap wear the rubber faster.
• Don’t run the wipers on dry glass. Use washer fluid first.
• Keep washer fluid filled.
• Lift blades or protect them during extreme conditions when parked, if practical.
• Replace blades on a schedule, such as every spring or before your region’s rainy season.

Why Choose OEM Mopar Wiper Blades?

• Exact sizes and connectors for your vehicle’s wiper arms.
• Designed for your windshield’s curve, for even pressure across the glass.
• Quiet, streak-free performance when installed on a clean windshield.
• Compatible with rain-sensing wipers and other factory features on equipped vehicles.
• Backed by a manufacturer’s warranty.
• Wholesale-level pricing with nationwide shipping.

Related Parts and Accessories

• Cabin filters to keep the air inside clean and the defroster working well.
• Sun shades to protect your interior and blades from heat.
• Car covers to protect your vehicle when parked.
• Engine air filters for dusty driving conditions.
• Vehicle accessories for protection and personalization.

Ordering Genuine Mopar Wiper Blades Online

Enter your VIN or select your year, model, and trim to see the wiper blades that fit your vehicle. Every blade is a genuine OEM Mopar part, offered at wholesale-level pricing and shipped nationwide. If you’re unsure which blades you need, our parts team can help.

Key Takeaways

• Replace wiper blades every 6 to 12 months, or sooner in hot, sunny climates.
• Streaking, skipping, chattering, and cracked rubber all mean it’s time for new blades.
• Driver and passenger blades are often different lengths. Shop by VIN.
• Don’t forget the rear blade on SUVs, minivans, and the Wrangler.
• Genuine Mopar blades fit your vehicle’s arms and windshield curve.

Frequently Asked Questions

How often should I replace my wiper blades?

Every 6 to 12 months is a good rule. In hot, sunny climates, replace them more often, since heat and sunlight age the rubber even when the wipers aren’t used.

Why do my new wiper blades streak?

A dirty windshield is the most common cause. Clean the glass thoroughly, including any wax or film, and wipe the new blades’ rubber edges with a damp cloth.

Are the driver and passenger blades the same size?

Often not. Many vehicles use a longer driver’s blade and a shorter passenger’s blade. Shop by VIN to get the correct sizes.

Does my vehicle have a rear wiper?

Most Jeep SUVs, the Wrangler, the Durango, and the Pacifica have a rear wiper. Pickup trucks and sedans generally don’t.

How do I know which connector my wiper arm uses?

Genuine Mopar blades are matched to your vehicle’s wiper arms, so the correct connector is included. Shopping by VIN ensures the blade will attach correctly.

Should I lift my wipers when parking in the heat?

It can reduce contact with hot glass, but it also leaves the arm springs under tension and the blades exposed. A windshield sunshade is often a better way to protect blades and the interior.

Can I replace just one wiper blade?

You can, but it’s better to replace both front blades together, since they age at the same rate. Mismatched blades can leave uneven wiping.

Do I need to replace the wiper arms?

Usually not. Arms last much longer than blades. Replace an arm if it’s bent, loose, or has a weak spring that causes poor wiping even with new blades.

Can worn wiper blades scratch my windshield?

Yes. Blades with torn rubber can let the metal frame contact the glass, and wiping dry, dusty glass can scratch it. Replace damaged blades right away and use washer fluid before wiping.

Will these wiper blades fit my vehicle?

Enter your VIN or select your vehicle to see the blades that fit. Our parts team can confirm fitment before shipping.

Are beam blades better than conventional blades?

Beam blades apply more even pressure and resist ice buildup, which makes them popular for many vehicles. Conventional blades work well in mild climates. Genuine Mopar blades match your vehicle’s original design.

Why do my wipers chatter even with new blades?

Chatter usually comes from a dirty or waxed windshield, or from a bent wiper arm holding the blade at the wrong angle. Clean the glass thoroughly and check the arm.

How long does it take to replace wiper blades?

Usually just a few minutes per blade, with no tools needed. Follow the steps above and test the new blades before driving.